Product Code: E1636
Availability: In Stock
$7.49
Ex Tax: $7.49

Qty

This product has a minimum quantity of 2
This module uses LCD to display voltage and current at the same time, you can press the button to adjust the output voltage. It can be used in a wide range of applications, such as DC-DC step-down power supply, battery charger, constant LED driving, etc.

Features:
LCD with backlight, voltage and current dual display at the same time.
Wiring terminals and USB interface output, convenient for wide applications.
Input voltage: 6-32V(input voltage must be higher than the output voltage of 1.5V above). 
Output voltage: 1.5-32V continuously adjustable.
5A peak current, recommend to use within 4.5A.
High conversion efficiency, up to 96%(efficiency affected by input and output voltage, current and pressure difference).
Delicate transparent acrylic case, components can be well protected and looks stylish.
A great DIY kit for DC-DC step-down power supply module.

Specifications:
Display: LCD
Input Voltage: 6-32V
Output Voltage: 1.5-32V Continuously Adjustable(input voltage must be higher than the output voltage of 1.5V above)
Output Current: Adjustable, Peak 5A(recommend use within 4.5A)
Output Power: Max. 75W(recommend use within 50W)
Working Frequency: 180KHz
Efficiency: 96%
Short-circuit Protection: Yes
Over Temperature Protection: Yes(automatically shut down output when over temperature)
Working Temperature: -20°C~70°C
Module Size: 65 * 40 * 25mm / 2.56 * 1.57 * 0.98in
Package Weight: 43g / 1.52oz

Note:
1. When the output exceeds 3A or 35W, please pay attention to heat dissipation; you can install a small fan on the input terminal.
2. The constant current is adjustable when output voltage>2V; current adjustment works under constant current state.
3. It's not under constant current mode until the load output current is larger than the setting current; otherwise, it would work under constant voltage state.
4. Before charge for USB devices, please make sure that the output voltage is adjusted to 5V; if higher than 5.5V, the screen would flash to remind you to adjust voltage.

Package List:
1 * DIY DC-DC Step-down Power Module 

Write a review

Note: HTML is not translated!